Bullberry Barrel Works, Ltd.
2430 West 350 North
Hurricane, UT 84737

 
Tel: 435.635.9866
Fax: 435.635.0348

fred@bullberry.com
Open Mon - Fri, 8-noon/1-5, Mtn Time

© 2019 Bullberry Barrel Works, Ltd., All Rights Reserved

SCOPE BASES AND RINGS

On any caliber in any action we suggest using steel scope bases/mounts whenever possible. This simple choice is a great first step toward improved accuracy potential. It may not seem like a big factor, but particularly in firearms that have scope bases attaching directly to the barrel, your scope base will heat up with the barrel’s natural warming during repeated firings. If an aluminum base is installed on this hot spot, it will heat at a different rate than the barrel itself. In addition, aluminum has the ability to hammer out of dimension under recoil. Scope rings can, over time, wear the original dimension and stability of aluminum bases which can lead to loose scope/ring fit and with that a drop in accuracy, even potential for damage to your scope’s internal parts.

These solid steel 6-screw attachment bases are made right here in-house. The 6-screw attachment accommodates the traditional T/C 4-hole scope pattern with two additional holes leap-frogged forward for a yet stronger attachment. The base was modeled after Warne's Maxima steel base, though it is taller for additional hammer clearance.

Bullberry Steel Weaver-style Base

Burris Zee Rings

These steel rings fit all Weaver-style scope bases utilizing a slide fit onto the base.

Burris Quick Detachable Zee Rings

Steel rings that fit all Weaver-style scope base utilizing a slide fit onto the base, with quick adjust levers.

Leupold PRW2 Rings

Steel rings that fit all Weaver-style scope bases. Secure directly to the base with two Torx screws for rock solid dependability. Rings tilt off of base while remaining solidly mounted and in alignment on scope.

Steel rings that fit all Weaver-style scope bases with detachable accuracy. They use an adjustable lever mechanism to lock the rings securely to the base while maintaining solid mounting and alignment on scope.

Leupold QRW2 Rings

Leupold Dual Dovetail Bases and Rings

UPDATE ON AVAILABILITY: It has come to our attention that Leupold and Burris have slowed or discontinued their production of the DD products. There are small numbers of bases and rings available in a few different versions, but given their unknown availability in the near future we suggest you contact us by phone if you are interested in any of the DD products to confirm availability.

 

Steel mounts that offer solid ring in base fit using two turn-in dovetail rings. Leupold dovetail rings should be installed by a gunsmith or lapped for precise alignment. Leupold Dual Dovetail bases can also be paired with Burris Signature Double Dovetail rings (see below).

Burris Signature Double Dovetail Bases and Rings

UPDATE ON AVAILABILITY: It has come to our attention that Leupold and Burris have slowed or discontinued their production of the DD products. There are small numbers of bases and rings available in a few different versions, but given their unknown availability in the near future we suggest you contact us by phone if you are interested in any of the DD products to confirm availability.

 

Posi-Align system utilizes synthetic inserts that pivot within outer steel ring. Grips like a solid weld without damaging scope. Ensures correct alignment of scope without the need for lapping.

Aluminum Bases

Evolution Gun Works (EGW) Picatinny Rail

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Weaver Alloy Base

The classic that started it all.