Scope Bases and Rings
On any caliber in any action we suggest using steel scope bases/mounts whenever possible. This simple choice is a great first step toward improved accuracy potential. It may not seem like a big factor, but particularly in firearms that have scope bases attaching directly to the barrel, your scope base will heat up with the barrel’s natural warming during repeated firings. If an aluminum base is installed on this hot spot, it will heat at a different rate than the barrel itself. In addition, aluminum has the ability to hammer out of dimension under recoil. Scope rings can, over time, wear the original dimension and stability of aluminum bases which can lead to loose scope/ring fit and with that a drop in accuracy, even potential for damage to your scope’s internal parts.
Bullberry Steel Weaver-style Base
These 6-screw attachment bases are made right here in-house. The 6-screw attachment accommodates the traditional T/C 4-hole scope pattern with two additional holes leap-frogged forward for a yet stronger attachment. The base was modeled after Warne's Maxima steel base, though it is taller for additional hammer clearance.
|Contender/G2 or Encore/ProHunter — Matte Blued||$40|
|Contender/G2 or Encore/ProHunter — Stainless-look coated||$50|
Burris Zee Rings
These steel rings fit all Weaver-style scope bases utilizing a slide fit onto the base.
|1"||Low, Medium, or High; Black or Matte||$35|
|1"||Low, Medium, or High; Nickel||$40|
|30mm||Medium or High; Matte only||$45|
Burris Quick Detachable Zee Rings
Steel rings that fit all Weaver-style scope bases utilizing a slide fit onto the base.
|1"||Low, Medium, or High; Matte only||$45|
Leupold PRW Rings
Steel rings that fit all Weaver-style scope bases. Secure directly to the base with two Torx screws for rock solid dependability. Rings tilt off of base while remaining solidly mounted and in alignment on scope.
|1"||Low, Medium, or High; Matte||$45|
|1"||Medium only; Gloss Black||$45|
|30mm||Medium or High; Matte||$55|
Leupold QRW Rings
Steel rings that fit all Weaver-style scope bases with detachable accuracy. They use an adjustable lever mechanism to lock the rings securely to the base while maintaining solid mounting and alignment on scope.
|1"||Low, Medium, or High; Gloss or Matte||$55|
|30mm||Medium or High; Gloss or Matte||$65|
|1"||Low, Medium, or High; Silver||$55|
Leupold Dual Dovetail Bases and Rings
Steel mounts that offer solid ring in base fit using two turn-in dovetail rings. Leupold dovetail rings should be installed by a gunsmith or lapped for precise alignment. Leupold Dual Dovetail bases can also be paired with Burris Signature Double Dovetail rings (see below).
|Contender ONLY||Handgun base; Gloss||$20|
|1"||Low, Medium, or High; Gloss, Matte, or Silver||$25|
|1"||Super High; Matte||$30|
|30mm||Low, Medium, High; Matte||$35|
|30mm||Super High; Gloss or Matte||$40|
Burris Signature Double Dovetail Bases and Rings
Posi-Align system utilizes synthetic inserts that pivot within outer steel ring. Grips like a solid weld without damaging scope. Ensures correct alignment of scope without the need for lapping.
|Encore ONLY||Rifle base; Matte||$20|
|1"||High; Gloss or Matte||$40|
|30mm||Medium or High; Matte||$65|
Evolution Gun Works (EGW) Picatinny Rail
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.This mount is a Picatinny-style base and compatiblewith Picatinny or Weaver scope rings.
|Contender||Matte; Specify 0 or 20 MOA||$40|
|Encore||Matte; Specify 0 or 20 MOA||$40|
Weaver Alloy Base
The classic that started it all.
|Contender||92A/S base - Gloss and Silver||$15|
|Encore||410/S base - Gloss and Silver||$18|