Encore® Barrels

Caliber List For Accuracy Guaranteed
Encore Barrels
These calibers are available IN ADDITION
TO
the 100+ centerfire and rimfire calibers
already chambered for the Contender®/G2 actions.
Rimfire Adapter Available
20
PPC |
20
BR |
22
PPC |
| 22
PPC Match |
22
BR |
22 BR Match
|
| 225
Win. |
22-250
Rem. |
22-250 Rem
Improved |
| 22-250
Rem. Imp. Match |
220
Swift |
22-6mm Rem
Improved |
| 22 - 6mm
Rem. Imp. Match |
6mm
PPC |
6mm PPC
Match |
| 6mm
BR |
6mm
BR Match |
6mm-250
Savage Imp |
| 243
Win. |
243
Win Improved |
6mm
Rem. |
6mm
Rem. Improved |
6mm Rem.
Imp. Match |
240 Weatherby |
240 Gibbs |
6mm-284 |
250
Savage |
250
Savage Imp. |
25-08 |
257
Roberts |
257
Roberts Imp. |
257 Roberts
Imp. Match |
25-284 |
25-06 |
25-06 Improved |
250
Gibbs |
| 6.5 Grendel |
6.5
x 55 Swede |
260 Rem |
| 6.5 x 54 Mauser |
6.5
x 57 Mauser |
6.5-284
Hornady |
| 6.5-284
Match |
6.5-06
|
6.5-06
Improved |
| 6.5mm Gibbs
|
6.5mm
Rem. Mag. |
264
Win. Mag. |
| 270
Winchester |
7mm
BR |
7mm
IHMSA |
| 7-08
Rem |
7
x 57 Mauser |
7
x 57 Improved |
| 280
Rem |
280
Rem Improved |
284
Winchester |
| 7mm
Rem Mag |
30-40
Krag |
30-40
Krag Imp. |
| 30-444
Marlin |
300
Savage |
30
IHMSA |
| 308
Winchester |
308
Win Match |
30-284 |
| 30-06
Springfield |
308
Norma Mag. |
300
Win Mag |
| 300
H&H Mag |
7.62X39
(.308 bore) |
338 Federal |
| 338-284 |
338-06 |
338
Win. Mag. |
348
Winchester |
35-444
Marlin |
358
Winchester |
35-284 |
35
Whelen |
35
Whelen Imp. |
350 Rem Mag |
375-444
Marlin |
375-284 |
| 375 H&H
Mag |
375-350
Rem Mag |
416
Lockhart |
| 416
Rigby |
444
Marlin |
454
Casull |
| 458 Win Mag
x 2" |
460 S &
W |
475 Linebaugh |
| 500 Linebaugh |
500 S &
W |
50-70 US
Gov't |
| 50-110 |
|
|
Many options for barrel profile/weight are
available. For example:
Full bull target barrel at one inch diameter to the muzzle.
Heavy Varmint taper to muzzle diameter of .850 inch.
Medium Varmint taper to muzzle diameter of .800 inch.
Light Varmint taper to muzzle diameter of .750 inch.
Heaver Sporter taper to muzzle diameter of .700 inch.
Medium Sporter taper to muzzle diameter of .650 inch.
Light Sporter taper to muzzle diameter of .600 inch.
We will produce barrels with smaller muzzle diameters only if someone
has a special purpose barrel in mind.
Note: These tapers will start 5 inches ahead
of the breech to allow ample room for scope mounting using any manufacturer's
hardware and to allow the rearmost forearm hanger bar dovetail position
on this full bull portion of the barrel.
Large bore barrels ordered with muzzlebrakes will
be limited in profile options. Call for specific set-ups according
to bore dimensions.
Unlike our Contender barrel forearm hanger
bar, we have bars of different configuration to match the various
profiles, allowing the bar and forearm to always mount parallel to
the bore.
Premium Quality Replacement
Encore Barrels
|
Blued |
Stainless |
|
Pistol Barrels (12" and under) |
$329 |
$359 |
|
Pistol Barrels (From 12" to 15") |
$379 |
$409 |
|
Rifle Barrels (up to 24") |
$439 |
$469 |
|
Rifle Barrels ( 24" and over) |
$469 |
$499 |
|
209 x 45/50, .475, and .500 Cal Pistols |
$499 |
$579 |
|
209 x 45/50, .475, and .500 Cal Rifles |
$549 |
$629 |
| |
add $60 |
All .17
caliber barrels |
add $30
|
| Select chrome-moly
& stainless (.20, .270, .321, .338, 9mm, .357, .358, .375, .40/10mm,
.41, .416, .451) |
add $80 |
| .429/44 calibers in CHROME-MOLY and .458 caliber barrels in STAINLESS |
add $80 |
| .429/44 calibers in STAINLESS -- pistol length barrels to 12" long |
add $80 |
| .429/44 calibers in STAINLESS -- barrels longer than 12", up to 26" |
add $120 |
| Muzzleloader
ramrod with belt pouch |
$40 |
| Muzzleloader
"E-Z Tip" extractor - installed in each 209 x 45 or 209 x 50 Encore barrel |
no extra charge |
Bullberry
muzzle brake (Integral recoil reduction system)
–––––––shown below
with step-up barrel profile |
add $115 |
|
| Threaded muzzle for pre-purchased attachment(s) for any standard thread size – without thread protection cap |
$115 |
| Threaded muzzle for pre-purchased attachment(s) for any standard thread size – including thread protection cap |
$140 |
| Bullberry thread-on muzzle brake – including thread protection cap |
$250 |
| Muzzleloader ramrod with belt pouch |
$45 |
| Drilling and tapping for scope or iron sights as requested |
no extra charge |
Scope
Base & Ring Options
Iron Sight Options for Competitive
Shooters
| Williams "WGRS" Rear Sight w/ peep or square-/U-notch blade |
|
| featuring Bullberry-made dovetailed sight in Marble steel ramp |
$45 |
| featuring Williams Gold or White Bead dovetailed into Marble ramp |
$50 |
| Williams "WGRS" Rear Sight with Fiber Optic Ghost Ring |
$40 |
| Williams Fire Sight dovetailed into Marble steel ramp |
$20 |
| Williams Peep Sight – Foolproof with Target knobs |
$89 |
| Lyman Target front sight – sight only, dovetailed into
barrel |
$50 |
| Lyman Target front sight – recommended installation
in dovetailed Marble steel ramp |
$60 |
| Lansing/Bullberry Front Globe |
$45 |
Scope Mounting
As a courtesy
to our barrel customers we will gladly supply many popular
brands of scope at very competitive prices. Call on specific
scope prices for your custom barrels in rifle and pistol configuration.
We will mount ordered scopes for you at your request.
If you already have
a scope for a custom Bullberry barrel in-the-works send it
to us for mounting and bore-sighting at no charge. |
Factory
Encore Barrel Alterations
If
you have a factory Encore that you are interested in having set-up
with our hanger bar system simply send it in with your contact information
and request for work. We modify barrels by cutting our standard dovetails
into the bottom of the barrel, then install dovetailed inserts and
our hanger bar. The modification is $40 per barrel (plus return shipping)
and will allow for any of the standard Bullberry/Woodsmith forearms
we offer to free float, maximizing your barrel's accuracy potential.
This operation does not take the lead-time of a custom barrel order.
Such items are placed in current production batches and may take up
to two to four weeks depending on production schedules at time of
arrival. Accompanying custom woodwork orders may increase this estimated
time of completion.
Encore Frames
| Blue |
$300 |
| Stainless |
$320 |
| ProHunter Blued |
$340 |
| ProHunter
Stainless |
$360 |
We supply frame assemblies to our barrel customers as a courtesy.
"Frame Only" sales will not be completed due to our special
inventory of these items. In addition, combination orders (those
including barrel(s) and frame, etc.) will have frame transfers completed
at the end of the barrel's production run, unless otherwise requested
at the time of order.
Frame purchases require an FFL for out-of-state transfers. Transfers
to customers within Utah require them to be in our shop to supply
ID and signature for full transfer through our facility. If this
is not possible a frame sale will require an FFL and function like
an out-of-state customer order.
Trigger Adjustment
If
you already own your Encore, ProHunter or Endeavor action, trigger adjustments are
available for $60, plus return shipping. Send your frame with a signed
request stating the specific pull you would like. We will not only
set the pull, but also lessen the felt creep by creating a glass-smooth
sear surface for optimum engagement. When purchasing a frame through
us a trigger adjustment can be included in the purchase for just $25. You may also request the installation of an overtravel screw if your frame does not have one. This will be done at no additional fee.